Schneider XW Hybrid Inverter and 33 Solar Panels

Kit includes

• Schneider 6848 XW Pro Hybrid Pure Sine Inverter
• Prewired Midnite E-panel
• 33 Solar Panels 315w Canadian Solar Split cell Mono
• Unirac Roof Racking for 33 panels



7.56 Kw Canadian Solar Array Hybrid Grid-Tied Inverter with Battery Backup System

The ultimate system for those wanting the Independence “Off-Grid” systems with the benefits of being “Grid-Tied “ .

Excess energy produced by the Solar panels is sent into the grid to reduce your energy costs. In the event of a power outage, the inverter will switch to power essential appliances such as lights, refrigerator, well pump, cell phone chargers, computers etc from PV and battery bank.

This design combines the best of both worlds, reducing your power bill and providing backup power in an emergency.

Pre-Wired and Tested for Safe, Fast Installation

Installing your system has never been easier with pre-wired and tested power centers. Experienced technicians have already assembled the inverter, controller, remote control, battery monitor, and necessary AC and DC disconnects for a safe, code-compliant power center ready to hang on your wall.

We’ve also included Unirac roof mount racking, MidNite combiner box.

This grid-tied battery backup package is one of the most sophisticated household renewable energy systems available. Schneider XW Power’s advanced technology and pre-wired power center assure a simplified, code-compliant installation with exceptional features.


1 SchneiderXW 6848
1 Midnite E Panel
1 Schneider system control module
1 Whiz Bang Jr Volt Accessory/Lead Acid Battery only
2 Midnite Classic Charge Controller
4 Surge Suppressors
1 Battery Temp Sensor Midnite
30 315 watt solar panels 60 cell
1 MNPV12 combiner box
2 80 to 120 amp MNPV Breakers
10 30a DC breakers /battery & panel
500 7 PV #10 50 ft extensions 25′ red 25′ blk
30 Unirac Roof Mounting kit
1 Solar & Electrical Diagrams

Schneider 6848 XW Pro with Duel
Midnite Controllers

Suntec Wind and Solar’s pre wired Schneider XW PRO 6848 power center comes with wired and tested, ready to install with just a few final connections. It comes equipped with a Schneider Electric XW PRO 6848 sinewave inverter and MidNite Classic 150 charge controller(s) installed on a MidNite E-panel and back plate.

Since this system has already been assembled and tested, you will save a significant amount of time, and don’t need to worry about selecting the right parts for a complete system. 

The included Whizbang Jr. is a sophisticated battery monitor that provides a percent state of charge reading for lead battery banks. This acts like a fuel gauge for your system, allowing you to monitor battery capacity at a glance. 

Solar Panel Details

315 Watt Mono Split Cel Perc

Model CS3K-315MS-Black Frame


  • Low power loss in cell connection
  • Better shading tolerance
  • Minimizes micro-cracks
  • Lower hot spot temperature
  • Heavy snow load up to 6000 Pa, Wind load up to 4000 Pa*


  • 10 years materials and workmanship
  • 25 years linear power output


Detailed Information

Canadian Solar has developed an innovative cool module design, Ku Modules (CS3K-315MS), based on Low Internal Current (LIC) module technology – the next generation of module technology.

Canadian Solar Inc. is committed to providing high quality solar products, solar system solutions and services to customers around the world. As leading PV project developer and manufacturer of solar modules with over 15 GW deployed around the world since 2001. Canadian Solar Inc. (NASDAQ:CSIQ) is one of the most bankable solar Companies Worldwide. 


Watts (STC) 315 W
Max Power Voltage (VMPP) 33.1 V
Max Power Curent (IMPP) 9.52 A
Open Circuit Voltage (VOC) 39.9 V
Short Circuit Current (ISC) 10.06 V
Max System Voltage (UL) DC 1000 V


Type Monocrystalline
Dimensions 65.9″ X 39.1″ X 1.38″
Weight 40.8 lbs
Frame Black Anodized Aluminum 

Junction Box – IP68, 3 Bypass diodes (w T4/MC4 compatible leads)


Click Here for Battery Bank Options